AP89042 Aplus Integrated circuits Inc., AP89042 Datasheet - Page 4

• Manufacturer Part Number: AP89042
• Description: Voice Otp Ic
• Manufacturer: Aplus Integrated circuits Inc.

PIN DESCRIPTIONS
Ver 3.2
S1 ~ S8
Input Trigger Pins:
- S1 to S8 is used to trigger the 32 Voice Groups in both Key and CPU Parallel Trigger Mode.
- In OTP Programming Mode, S1 to S7 are used as program enable pins.
SBT
Input Trigger Pin:
- In Key Trigger Mode, this pin is trigger pin to trigger the playback of Voice Groups one by one
- In CPU Parallel Command Mode, this pin is used as address strobe to latch the input from S1 to
- In OTP Programming Mode, this pin is used as PGM signal.
VDD
Power Supply Pin.
VSS
Power Ground Pin
VOUT1 and VOUT2
Digital PWM output pins which can drive speaker and buzzer directly for voice playback.
OSC
During voice playback, an external resistor is connected between this pin and the VDD pin to set the
sampling frequency. In OTP Programming Mode, this is the ACLK input signal.
VPP
Connection to VDD is required during voice playback. In OTP Programming Mode, this pin is
connected to a separate 6.5V power supply.
OUT1, OUT2 and OUT3
- In Key Trigger Mode and CPU Parallel Command Mode, these pins are user programmable pins
- During OTP programming, OUT1 serves as OEB while OUT2 serves as data IO.
COUT
Analog 8-bit current mode D/A output for voice playback
RST
Chip reset in playback mode or DCLK pin in OTP programming mode.
sequentially.
S5 and starts the voice playback.
for the STOP pulse, BUSY and LED signals.
Integrated Circuits Inc.
4
aP89042
May 31, 2007