DF2-12P-2.5C Hirose Electric, DF2-12P-2.5C Datasheet - Page 4

• Manufacturer Part Number: DF2-12P-2.5C
• Description: 2.5mm Pitch Connector Directly Mounted on Board (Product Compliant to UL/CSA Standard)
• Manufacturer: Hirose Electric

BPrecautions
1. Recommended Soldering Condition
2. Cleaning Condition
3. Connection Condition
Refer to Nylon Connector Use Hand book.
Don't use such a solvent as trichloroethane which degrades the cable jacket.
In addition, avoid heat cleaning with such a solvent.
Refer to Nylon Connector Use Hand book.
After the soldering process, if a load is applied to the cable in the state where the connector
and the cable contains heat, the cable jacket holding members are apt to be loosened.
Therefore, the post-soldering process should be carried out after the connector temperature
returns to the room temperature.
B135