DF17A-20DP-0.5V Hirose Electric, DF17A-20DP-0.5V Datasheet - Page 12

• Manufacturer Part Number: DF17A-20DP-0.5V
• Description: 0.5mm Pitch Board to Board Connector
• Manufacturer: Hirose Electric

A330
1. Recommended
2. Recommended Manual
3. Recommended
4. Board Warp(SMT)
5. Cleaning Condition
6. Cautions
Precautions
Temperature Profile
(SMT)
Soldering Condition
(SMT)
Screen Thickness
(SMT)
Temperature
Note 1. Maximum twice action is allowed under the same condition. However, the interval between
Note 2.The temperature indicates the board surface temperature of the connector lead area.
Soldering iron temperature: 290 10 oldering time: Within 2 seconds
0.15mm
Max 0.2mm in the connector center area, based on the both connector edges
Refer to the "Nylon Connector Use Hand book".
The header is designed in a structure where contacts are exposed. Touching it with bare
hands would cause contact failure or electrostatic element damage.
Where no board is mounted, the insertion or extraction will cause damage or contact deformation.
Avoid retaining the board with the connector only, and fix the board by any other means than the connector.
Excessive scoop insertion or extraction may result in damage.
In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector.
The color phase of this product may be slightly different from that of the formed product
according to the manufacturing lot. However, the difference doesn't affect the performance.
250
200
150
100
50
0
the first and second actions must be maintained at the room temperature.
0SSEC
Preheating area
Soldering area
IR reflow condition
50SSEC
150
235 5
220
Preheating area
min for 10 to 30 seconds
for 10 seconds max.
for 100 to 120 seconds
100SSEC
150SSEC
Soldering area
200SSEC
240
220
max.
Time