DF22A-1RS/P-7.92 Hirose Electric, DF22A-1RS/P-7.92 Datasheet - Page 15

• Manufacturer Part Number: DF22A-1RS/P-7.92
• Description: 7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TUV Listed)
• Manufacturer: Hirose Electric

BTools
Note 1: When crimping contact DF22A-1012SCF use a press with 3.5 ton min.
Note 2: AP109A type applicators cannot be used with the CM-105 press.
BContact Extraction
BPrecautions
Automatic
Manual
Make sure that the lock is fully depressed before un-mating the connectors.
Use correct size of the wires. Do NOT forcefully twist or deform wires, as this may affect the
crimped contact connection.
Contact extraction tool: Flat-bladed screwdriver, 1.4 mm blade width
Intended crimp Contacts: DF22-1416SC(F), DF22A-1416SC(F), DF22A-1012SC(F), DF22-1416PC(F), and DF22A-1416PC(F)
Work Method
Type
Housing Cross-Sectional Diagram
Press unit
Applicators are used in automatic crimping
machines manufactured by Hirose Electric
Applicators are used in automatic
crimping machines manufactured by
other companies
Crimp tools
Item
CM-105
AP105-DF22-1416
AP105-DF22A-1416
AP109A-DF22-1416
AP109A-DF22A-1416
AP109A-DF22A-1012
HT104/DF22-1416
HT104/DF22A-1416
HT103/DF22A-1012
Part Number
901-0005-4
901-4576-7
901-4578-2
901-4579-5
901-4580-4
901-4582-0
550-0285-0
550-0286-2
550-0288-8
CL No.
1. Refer to the drawing No. 1. Insert
2. Assure that the lance is deflected
correct size screwdriver in the
insulator against the molded-in
lance. Deflect the lance as shown.
to release the contact and pull- out
wire with the terminated contact.
DF22/DF22A-1416SCF/PCF
DF22-1416SCF/PCF
DF22A-1416SCF/PCF
DF22-1416SCF/PCF
DF22A-1416SCF/PCF
DF22A-1012SCF
DF22-1416SC/PC
DF22A-1416SC/PC
DF22A-1012SC
Applicable Contacts
15