LM190E01-C4 LG, LM190E01-C4 Datasheet - Page 28

• Manufacturer Part Number: LM190E01-C4
• Description: TFt LCD
• Manufacturer: LG

9-3. ELECTROSTATIC DISCHARGE CONTROL
9-4. PRECAUTIONS FOR STRONG LIGHT EXPOSURE
9-5. STORAGE
9-6. HANDLING PRECAUTIONS FOR PROTECTION FILM
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that
treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
(2) The polarizer surface should not come in contact with any other object.
(1) The protection film is attached to the bezel with a small masking
(2) When the module with protection film attached is stored for a long time, sometimes there remains a
(3) You can remove the glue easily. When the glue remains on the bezel surface or its vestige is
Strong light exposure causes degradation of polarizer and color filter.
When storing modules as spares for a long time, the following precautions are necessary.
Ver. 1.0
It is recommended that they be stored in the container in which they were shipped.
This should be peeled off slowly and carefully by people who are electrically grounded and with well
ion-blown equipment or in such a condition, etc.
very small amount of glue still on the bezel after the protection film is peeled off.
recognized, please wipe them off with absorbent cotton waste or other soft material like chamois
soaked with normal-hexane.
temperature between 5°C and 35°C at normal humidity.
When the protection film is peeled off, static electricity is generated between the film and polarizer.
Product Specification
JUL. 30, 2003
tape.
Liquid Crystal Display
www.DataSheet4U.com
LM190E01
28 / 29