FT231XQ-R International Semiconductor Technologies, FT231XQ-R Datasheet

no-image

FT231XQ-R

Manufacturer Part Number
FT231XQ-R
Description
Specifications: Number of Channels: 1, UART ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
Manufacturer
International Semiconductor Technologies
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
FT231XQ-R
Manufacturer:
FTDI
Quantity:
3 400
Part Number:
FT231XQ-R
0
Devices International Ltd
(
USB to FULL HANDSHAKE UART IC
The FT231X is a USB to serial UART
interface with full modem control and
the following advanced features:
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced
in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology
Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your
statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in
which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminar y
information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by
the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow
G41 1HH United Kingdom. Scotland Registered Company Number: SC136640
Future Technology
Single chip USB to asynchronous serial data
transfer interface.
Entire USB protocol handled on the chip. No
USB specific firmware programming required.
Fully
programmable (MTP) memory, storing device
descriptors and CBUS I/O configuration.
Fully integrated clock generation with no
external crystal required plus optional clock
output selection enabling glue-less interface
to external MCU or FPGA.
Data transfer rates from 300 baud to 3 Mbaud
(RS422, RS485, and RS232 ) at TTL levels.
512 byte receive buffer and 512 byte transmit
buffer utilising buffer smoothing technology to
allow for high data throughput.
FTDI‟s royalty-free Virtual Com Port (VCP)
and Direct (D2XX) drivers eliminate the
requirement for USB driver development in
most cases.
Configurable CBUS I/O pins.
Transmit and receive LED drive signals.
UART interface support for 7 or 8 data bits, 1
or 2 stop bits and odd / even / mark / space
no parity
Synchronous
interface options with RD# and WR# strobes.
integrated
FT231X
and
Copyright © 2012 Future Technology Devices International Limited
2048
asynchronous
byte
multi-time-
bit
FT231X USB TO FULL HANDSHAKE UART IC
bang
)
Document No.: FT_000565 Clearance No.:
USB Battery Charger Detection. Allows for USB
peripheral devices to detect the presence of a
higher
charging.
Device supplied pre-programmed with unique
USB serial number.
USB
powered, self-powered and bus-powered with
power switching
Integrated +3.3V level converter for USB I/O.
True 3.3V CMOS drive output and TTL input;
Operates down to 1V8 with external pull-ups.
Configurable I/O pin output drive strength; 4
mA(min) and 16 mA(max).
Integrated power-on-reset circuit.
Fully integrated AVCC supply filtering - no
external filtering required.
UART signal inversion option.
+ 5V Single Supply Operation.
Internal 3V3/1V8 LDO regulators
Low operating and USB suspend current; 8mA
(active-typ) and 125uA (suspend-typ).
UHCI/OHCI/EHCI host controller compatible
USB 2.0 Full Speed capable.
Extended operating temperature range; -40 to
85⁰C.
Available in compact, Pb-free, 20 Pin SSOP and
QFN packages (both RoHS compliant).
.
Power
power
Configurations;
source
to
enable
Datasheet
supports
Version 1.1
FTDI# 261
improved
bus-
1

Related parts for FT231XQ-R

Related keywords