DM19EC100DO3-SA-R02 Sharma Electro Components, DM19EC100DO3-SA-R02 Datasheet - Page 4
![no-image](/images/no-image-200.jpg)
DM19EC100DO3-SA-R02
Manufacturer Part Number
DM19EC100DO3-SA-R02
Description
MICA Capacitors
Manufacturer
Sharma Electro Components
Datasheet
1.DM19EC100DO3-SA-R02.pdf
(17 pages)
MOISTURE RESISTANCE LOADING
Capacitors shall be subjected to a temperature of 40±2 °C at 90 to 95% relative humidity
with rated voltage for 500 Hours. After the test the samples are maintained at normal
temperature and relative humidity for a period of 4 to 24 hours. When tested after this;
1. The capacitor samples shall be free of cracks, or other mechanical damages and the
2. The samples shall meet the original requirement of the Withstanding voltage
3. The samples shall meet the after test requirement of Insulation resistance as furnished in
4. The dissipation factor shall be within 2 times the original limits
5. The capacitance change shall not exceed ±5% or ±1 pF
LIFE TEST
The capacitor samples shall be subjected to a temperature of 125 °C with 150% of rated
voltage for 2000 hours.
After the test :
1. The capacitor samples shall be free of cracks, or other mechanical damages and the
2. The samples shall meet the original requirement of the
3. The samples shall meet the original requirements of Insulation resistance as furnished in
4. The dissipation factor shall be within 1.5 times the original limits
5. The capacitance change shall not exceed ±3% or ±1 pF(whichever is greater) for
OTHER TYPICAL VARIATION PATTERNS
Some typical variation patterns for selected values during heat resistance load life test and
moisture proof load life tests as listed below are illustrated in Figures 8 through 10.
1. Insulation resistance Vs. time for heat resistance load life test and moisture proof load life
2. Capacitance change in percentage Vs. time (Figure 9).
3. Dissipation factor Vs. time (Figure 10).
Other variation patterns and characteristic for selected values as listed below are furnished
as Figures 11 through 14
1. Capacitance change Vs. frequency (Figure 11)
2. Capacitance change Vs. time(Figure 12)
3. Dissipation factor change Vs. frequency(Figure 13)
4. Insulation resistance Vs. temperature (Figure 14)
FIGURE 9
FIGURE 12
marking shall remain legible
Figure 2
marking shall remain legible
Figure 1.
characteristic "C" and ±2.5 ±1pF (whichever is greater) for characteristic D, E and F.)
tests (Figure 8).
Tel: 516-981-6690
FIGURE 13
FIGURE 10
Fax: 516-981-6867
Withstanding voltage
SUSCO Engineers & Buyers Guide - Mica Section
MICA CAPACITORS
FIGURE 6
FIGURE 7
FIGURE 8
FIGURE 11
FIGURE 14
4