MAXQ3108 Maxim Integrated Products, MAXQ3108 Datasheet - Page 30

• Manufacturer Part Number: MAXQ3108
• Description: Dual-Core Microcontroller
• Manufacturer: Maxim Integrated Products

www.DataSheet4U.com
Low-Power, Dual-Core Microcontroller
30
RTSS (1Ah, 01h)
Initialization:
Read/Write Access:
RTSS.[7:0]:
RTSH (1Bh, 01h)
Initialization:
Read/Write Access:
RTSH.[15:0]:
RTSL (1Ch, 01h)
Initialization:
Read/Write Access:
RTSL.[15:0]:
RSSA (1Dh, 01h)
Initialization:
Read/Write Access:
RSSA.[7:0]:
______________________________________________________________________________________
RTC Subsecond Counter Register (8-Bit Register)
This register is battery backed through POR so long as V
is indeterminate on the very first POR and must be configured initially by the user. This register is
unaffected by other resets.
Write accessible when RTCE = 0 and BUSY = 0. Read accessible at all times, but the value could
be indeterminate if RDY = 0. Software should be careful to read this register only when RDY = 1.
RTC Subsecond Counter Bit 7:0. This ripple counter represents 1/256-second resolution for the
RTC and its content is incremented with each 256Hz clock tick derived from the 32.768kHz
oscillator. When the counter rollover, its output is used to drive the 32-bit second counter.
RTC Second Counter High Register (16-Bit Register)
This register is battery backed through POR so long as V
is indeterminate on the very first POR and must be configured initially by the user. This register is
unaffected by other resets.
Write accessible when RTCE = 0 and BUSY = 0. Read accessible at all times, but the value could
be indeterminate if RDY = 0. Software should be careful to read this register only when RDY = 1.
RTC Second Counter High Bit 15:0. This register contains the most significant bits for the 32-bit
second counter. The RTC is a ripple counter that consists of cascading the 32-bit second counter
and 8-bit subsecond counter (RTSH, RTSL, and RTSS).
RTC Second Counter Low Register (16-Bit Register)
This register is battery backed through POR so long as V
is indeterminate on the very first POR and must be configured initially by the user. This register is
unaffected by other resets.
Write accessible when RTCE = 0 and BUSY = 0. Read accessible at all times, but the value could
be indeterminate if RDY = 0. Software should be careful to read this register only when RDY = 1.
RTC Second Counter Low Bit 15:0. This register contains the least significant bits for the 32-bit
second counter. The RTC is a ripple counter that consists of cascading the 32-bit second counter
and 8-bit subsecond counter (RTSH, RTSL, and RTSS).
RTC Subsecond Alarm Register (8-Bit Register)
This register is battery backed through POR so long as V
is indeterminate on the very first POR and must be configured initially by the user. This register is
unaffected by other resets.
Unrestricted read. Write accessible when BUSY = 0 and either (ASE = 0 or RTCE = 0).
RTC Subsecond Alarm Register Bit 7:0. This register contains the reload value for the subsecond
alarm. The ALSF bit is set when an autoreload occurs.
Special Function Register Bit Descriptions (continued)
BAT(MIN)
BAT(MIN)
BAT(MIN)
BAT(MIN)
< V
< V
< V
< V
BAT
BAT
BAT
BAT
< V
< V
< V
< V
BAT(MAX)
BAT(MAX)
BAT(MAX)
BAT(MAX)
; however, it
; however, it
; however, it
; however, it