CN28JTN103 TA-I TECHNOLOGY CO., LTD, CN28JTN103 Datasheet - Page 5

• Manufacturer Part Number: CN28JTN103
• Description: Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks
• Manufacturer: TA-I TECHNOLOGY CO., LTD

Whisker
Resistance to Solder Heat
6.Marking
TA-I
Note* : RCWV : Rated continuous working voltage
6.2 ±1% (E96 )
6.1 ±5%(E24)
represents exponent for base of 10.
significant figures of nominal resistance value inΩ, and the third digit
Resistance value is expressed by 3 digits, the first two digits represent the
Resistance value is expressed by 3 digits, the first three digits represent the
significant figures of nominal resistance value inΩ, and the fourth digit
represents exponent for base of 10.
E.G. 4701 = 470×10
E.G. 472 = 47×10
Thick Film Chip Resistor Networks
Thick Film Chip Resistor Arrays
SONY
SS-00254-8
SONY
SS-00254-5
(Lead-Free for CN28 Series)
2
= 4700Ω = 4.7KΩ
1
= 4700Ω = 4.7kΩ
Component , Lead-Free Soldering part 8 :
Solder Heat Resistance Test for SMD. Lead-
Free Soldering “
Temp. Cycles :
-55℃(30 min.) / +155℃(30 min. )
Testing duration : 500±4 hours
Temp. Humidity Chambers:
Temperature : 85℃
Humidity : 85% RH
Testing duration : 500±4 hours
Component , Lead-Free Soldering part 5 :
Solder Heat Resistance Test for SMD. Lead-
Free Soldering “
Flow Solder :
Pre – heat : 100 to 105 ℃ 30±5 sec
Temperature : 260±3℃ 10 +1/ -0 sec
The entire sample shall be dipped in solder.
The specimen shall be stored at standard
atmospheric conditions for 1 hour .
Iron Solder :
Bit temperature : 350 ±10℃
Application time of soldering iron : 3 +1/- 0sec
Apply the soldering iron to the electrode .
The specimen shall be stored at standard
atmospheric conditions for 1 hour , after
which the measurements shall be made
.
TA-I TECHNOLOGY CO., LTD
.
Whisker formation :
Electrical characteristics shall be
Satisfied .
Without distinct deformation in
appearance
50 um or less .
page
No
TCN-280S004E
5/10