SPC-0602-100 Taipei Multipower Electronics, SPC-0602-100 Datasheet - Page 2

• Manufacturer Part Number: SPC-0602-100
• Manufacturer: Taipei Multipower Electronics

PACKING
Tape and Reel Orientation
NOTE : Top view shown with cover tape removed.
TAPE SPECIFICATIONS:
Carrier Tape Type: Conductive.
Cover Tape Type: Antistatic.
Cover Tape Adhesion to Carrier: 10 –70 grams.
REEL SPECIFICATIONS:
Non-antistatic.
Diameter (flange) : 13” (330.2mm)
STANDARDS :
“ Taping of surface Mount Components for Automatic Placement” .
ITEM
1
2
3
4
5
6
Thermal Shock
Vibration
Solderability
Storage Life
Moisture Resistance
Mechanical Shock
All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481
TEST
USER DIRECTION OF FEED
ENVIRONMENTAL PERFORMANCE
Ten cycles of 30 minutes @ -55°C,15seconds maximum @room ambient,
1 cycle of 30 minutes duration per the following:
5-7 Hz constant displacement of .75 inch, 5 minutes,
7-30 Hz constant acceleration of 1.5 g’s. 10 minutes,
30-50 Hz constant displacement of 0.033 inch, 5 minutes,
50-500 Hz constant acceleration of 4.2 g’s, 10 minutes.
Per MIL-STD-202, Method 208, except steam aging is omitted
and pads are dipped 30 from vertical. Solder temperature:
+ 245°C 5°C. Immersion dwell time: 5 1/2 seconds.
Subject the component to 168 hours at + 85°C and 85% relative humidity.
Precondition at + 40°C for 60 minutes. Subject the component
to 240 hours at + 40°C and 90 to 95% relative humidity.
One-half sine pulse (8700 g’s for 0.3 milliseconds) in each
direction along 3 mutually perpendicular axes in each direction
(total of 6 shocks).
SMI-40 SERIES
SMI-50 SERIES
MODEL
30 minutes @ + 125°C, 15 seconds maximum @ room ambient.
LABEL AREA
WIDTH
12 mm
16 mm
TYPE
CONDITION
18.4 mm
22.4 mm
WIDTH
REEL
COMPONENT
PITCH
8 mm
8mm
COVER TAPE
EMBOSSED CAVITY
CARRIER TAPE
PER REEL
2500
1000
UNITS