S-5814A Seiko Instruments, S-5814A Datasheet - Page 10

• Manufacturer Part Number: S-5814A
• Description: (S-5813A / S-5814A) CMOS TEMPERATURE SENSOR IC
• Manufacturer: Seiko Instruments

www.DataSheet4U.com
10
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
• Wiring patterns for the VDD pin, VOUT pin, and VSS pin should be designed to hold low impedance.
• In this IC, if load capacitance of the VOUT pin is large, VOUT pin voltage may oscillate. It is recommended not to use the
• Please do not connect a pull-up resistor to the output voltage pin.
• The application condition for input voltage, output voltage and load voltage must not exceed the package power
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
• SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including this
Precautions
dissipation.
protection circuit.
IC of patents owned by a third party.
external capacitor between the VOUT and VSS pins. When using an external capacitor, mount it near the VOUT pin.
When connecting an A/D converter etc. to the VOUT pin, the input pin capacitance of the A/D converter and the parasitic
To prevent oscillation, it is recommended to use the following output load condition.
capacitance component between wires are included as load capacitance.
Caution The above connection diagram and constant will not guarantee successful operation. Perform
Load capacitance of VOUT pin (C
through evaluation using the actual application to set the constant.
VDD
L
) : 2.2 μF or less
Seiko Instruments Inc.
S-5813A/5814A
Series
VSS
Figure 8
VOUT
C
L
V
OUT
Rev.1.2
_00