MB89R116 Fujitsu Microelectronics, Inc., MB89R116 Datasheet - Page 4

• Manufacturer Part Number: MB89R116
• Description: Fram?-mounted High-capacity, High-speed Lsi For Rfid Tag
• Manufacturer: Fujitsu Microelectronics, Inc.

enabled) status.
to specify the purpose for which the RFID tag and R/W are
used. In addition, the Lock AFI command sets the AFI to a
status in which data writing is disabled.
addition, the Lock DSFID command sets DSFID to a status in
which data writing is disabled.
be stored in 1 block, the number of blocks contained in 1 chip,
IC information, and system information are read.
the system area and reads the data to determine whether or
not the corresponding block is locked.
consists of 1-bit-theft prevention and product control are
cancelled when data is “ 0, ” and product control status is set
when data is “ 1. ”
area to update the stored data. It is used for maintenance of
stored data.
plurality blocks.
Future Development
release “ MB89Rxxx ” , a miniaturized version of “ MB89R116 ”
40
This is the command to set the tag to Ready (communication-
The write AFI command writes data into AFI. It is possible
The write DSFID command writes data into DSFID. In
The data of UID, DSFID, AFI, the number of bytes that can
This command reads the block security status data stored in
This is our original command; it is for theft prevention.
This is our original command, and it writes data into EAS. It
This is our original command that accesses the entire FRAM
This is our original command that is used to read data from
Fig. 2
As succeeding products of this product, FUJITSU plans to
Reset to Ready command
Write (Lock) AFI command
Write (Lock) DSFID command
Get System Information command
Get Multiple Block Security Status command
EAS command
Write EAS command
Refresh command
Read Multiple Blocks Unlimited command
FIND Vol.21
shows the roadmap of our RFID tags.
New Products
No.3
2003
MB89R116
conforming to the ISO/IEC15693 international standard,
and the low capacity and low cost “ MB89Ryyy. ”
includes the “ MB89R116 ” -mounted card-type tag, reader/
writer, and demonstration software is planned.
meet customers
NOTES
*
*
*
*
Table 4 Commands
3: Read time of 1.5sec. and write time of 1.4sec. are the values
1:
2: International standard ISO/IEC15693: One of the international
Moreover, the provision of a development evaluation kit that
FUJITSU will continue to develop and supply products to
FRAM is a registered product of American Ramtron International
Corporation.
“
standard programs for noncontact IC tags. It is applied to systems
with a communication distance of 10 to 70cm. In addition, the
frequency supports 13.56MHz.
when the Read Multiple Blocks command or the Write Multiple
Blocks command is used. When the Read Multiple Blocks
Unlimited command is used, reading the data is possible in a
shorter period.
RFID tag: A wireless ID recognition system that is also called
IC tag
Command type
Mandatory
Mandatory
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Custom
Custom
Custom
Custom
”
or
“
wireless tag.
,
needs.
”
Get Multiple Block Security Status
Read Multiple Blocks Unlimited
Get System Information
Read Mutiple Blocks
Write Mutiple Blocks
Read Single Block
Write Single Block
Reset to Ready
Write DSFID
Lock DSFID
Lock Block
Command
Stay Quiet
Write EAS
Write AFI
Inventory
Lock AFI
Refresh
Select
EAS