SG1526 Microsemi Corporation, SG1526 Datasheet - Page 8

• Manufacturer Part Number: SG1526
• Description: REGULATING PULSE WIDTH MODULATOR
• Manufacturer: Microsemi Corporation

4/90 Rev 1.1 2/94
Copyright
APPLICATION INFORMATION
SG1526 LAB TEST FIXTURE
OUTPUT DRIVERS
The totem-pole output drivers of the SG1526 are designed to source and sink 100mA continuously and 200mA peak. Loads
can be driven either from the output pins 13 and 16, or from the +V
outputs as a function of load current are found in Figures 14 and 15.
Since the bottom transistor of the totem-pole is allowed to saturate, there is a momentary conduction path from the +V
to ground during switching. To limit the resulting current spikes a small resistor in series with pin 14 is always recommended.
The resistor value is determined by the driver supply voltage, and should be chosen for 200mA peak currents, as shown in
Figure 25.
FIGURE 23.
PUSH-PULL CONFIGURATION
1994
(continued)
FIGURE 24.
SINGLE-ENDED CONFIGURATION
8
C
pin, as required. Curves for the saturation voltage at these
SG1526/SG2526/SG3526
FIGURE 25.
DRIVING N-CHANNEL POWER MOSFETS
11861 Western Avenue
L
INFINITY Microelectronics Inc.
[phone]
Garden Grove, CA 92841
C
terminal
FAX: [phone]