TIS-300-124 Traco Electronic AG, TIS-300-124 Datasheet - Page 6

• Manufacturer Part Number: TIS-300-124
• Description: Industrial Power Supplies
• Manufacturer: Traco Electronic AG

Complete external battery modules (3.2 Ah or 7 Ah standard) with lead batteries are available on request.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
In addition to the standard power supply function, these
models include a professional battery management system
to charge and monitor an external battery. In case of a
power failure the battery is switched automatically and
without any interruption to the DC-output. If mains power
is available again, the battery is switched off. The hold-up
time is limited only by battery capacity and load. Charge
current and voltage can be adjusted to values as required
by battery type. Power fail and low battery alarm signals
DC-UPS-System
Models
(includes terminal plugs)
TIS 300-124 UDS
TIS 600-124 UDS
Ordercode
115 / 230 VAC
115 / 230 VAC
Input Voltage
selectable
selectable
Output Power
300 W
600 W
max.
are available via two independent relay contacts. During
normal operation the battery status is monitored by
periodically loading the battery for short time. If a cell
resistance is high, there is a relay alarm available. The
battery is fully protected under any operational conditions.
The power supply is short circuit protected even in battery-
backup operation, however for safety reason the battery
should be fused with a fast blow fuse. Battery mode can
be activated by connection of Pin 7 and 8.
Output Voltage
Industrial Power Supplies
TIS Series
24 VDC
24 VDC
nom.
Output Current
max.
12 A
24 A
75-600 Watt
Page 6