T315HW05 AUO, T315HW05 Datasheet - Page 31

• Manufacturer Part Number: T315HW05
• Description: LCD Module
• Manufacturer: AUO

© Copyright AUO Optronics Corp. 2009 All Rights Reserved.
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM
9-3 ELECTROSTATIC DISCHARGE CONTROL
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
9-5 STORAGE
Strong light exposure causes degradation of polarizer and color filter.
When storing modules as spares for a long time, the following precautions are necessary.
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain
that treatment persons are connected to ground through wristband etc. And don’t touch interface pin
directly.
(7) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
(2) The polarizer surface should not come in contact with any other object. It is recommended that they
(1) The protection film is attached to the bezel with a small masking tape. When the protection film is
(2) When the module with protection film attached is stored for a long time, sometimes there remains a
(3) You can remove the glue easily. When the glue remains on the bezel or its vestige is recognized,
be done by system manufacturers. Grounding and shielding methods may be important to minimize
the interface.
temperature between 5
be stored in the container in which they were shipped.
peeled off, static electricity is generated between the film and polarizer. This should be peeled off
slowly and carefully by people who are electrically grounded and with well ion-blown equipment or
in such a condition, etc.
very small amount of glue still on the bezel after the protection film is peeled off.
please wipe them off with absorbent cotton waste or other soft material like chamois soaked with
normal-hexane.
℃
and 35
℃
at normal humidity.
T315HW05 V0 Product Specification
Page 31 / 31
www.DataSheet4U.net
Rev. 01