TC164-JR Yageo, TC164-JR Datasheet - Page 6

• Manufacturer Part Number: TC164-JR
• Description: CHIP RESISTORS ARRAY
• Manufacturer: Yageo

Mar. 24, 2004 V.4
TYPE
Solderability
Resistance
Moisture
Strength
Bending
Life
Chip Resistor Surface Mount
Place the specimen in the test chamber and subject to 42 damp heat cycles. Each
one of which consists of the steps 1 to 7 as figure 9. The total length of test is 1,000
hours. Have the specimen stabilized at room temperature for 24 hours after testing.
Measure the resistance to determine
Place the specimen in the oven at 70±2°C. Apply the rated voltage to the specimen
at the 1.5 hours on and 0.5 hour off cycle. The total length of test is 1,000 hours.
Have the specimen stabilized at room temperature for one hour minimum after
testing.
Measure the
Immerse the specimen in the solder pot at 235±5°C for 5 sec.
Mount the specimen on a test board as
shown in the figure 8. Slowly apply the force
till the board is bent for 5±1 sec.
Measure the
TEST METHOD
Δ
Δ
R/R(%) at this position.
R/R(%).
Δ
R/R(%).
TC
SERIES
Type
Bent Distance (d)
Fig. 8 Principle of the bending
164
test
TC164
1mm
ACCEPTANCE STANDARD
±(2.0%+0.05Ω)
No visible damage
±(3.0%+0.1Ω)
No visible damage
At least 95% solder coverage on
the termination
±(1.0%+0.05Ω)
No visible damage
www.DataSheet4U.com
www.yageo.com
6
7