74AHC1G66 Philips Semiconductors, 74AHC1G66 Datasheet - Page 20
![no-image](/images/manufacturer_photos/0/5/522/philips_semiconductors_sml.jpg)
74AHC1G66
Manufacturer Part Number
74AHC1G66
Description
Bilateral switch
Manufacturer
Philips Semiconductors
Datasheet
1.74AHC1G66.pdf
(24 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
74AHC1G66GV
Manufacturer:
NXP
Quantity:
60 000
Company:
Part Number:
74AHC1G66GV
Manufacturer:
NXP
Quantity:
750
Part Number:
74AHC1G66GV
Manufacturer:
PHI
Quantity:
20 000
Company:
Part Number:
74AHC1G66GW
Manufacturer:
NXP
Quantity:
10 148
Company:
Part Number:
74AHC1G66GW,125
Manufacturer:
ADI
Quantity:
132
Company:
Part Number:
74AHC1G66GWЈ¬125
Manufacturer:
NXP
Quantity:
261 000
Philips Semiconductors
Suitability of surface mount IC packages for wave and reflow soldering methods
Notes
1. For more detailed information on the BGA packages refer to the “(LF)BGA Application Note ” (AN01026); order a copy
2. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
3. These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
4. If wave soldering is considered, then the package must be placed at a 45 angle to the solder wave direction.
5. Wave soldering is suitable for LQFP, TQFP and QFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
6. Wave soldering is suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65 mm; it is
2002 Jun 06
BGA, LBGA, LFBGA, SQFP, TFBGA, VFBGA
HBCC, HBGA, HLQFP, HSQFP, HSOP, HTQFP, HTSSOP, HVQFN,
HVSON, SMS
PLCC
LQFP, QFP, TQFP
SSOP, TSSOP, VSO
Bilateral switch
from your Philips Semiconductors sales office.
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods” .
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
The package footprint must incorporate solder thieves downstream and at the side corners.
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
(4)
, SO, SOJ
PACKAGE
(1)
20
not suitable
not suitable
suitable
not recommended
not recommended
74AHC1G66; 74AHCT1G66
WAVE
(3)
SOLDERING METHOD
(4)(5)
(6)
suitable
suitable
suitable
suitable
suitable
Product specification
REFLOW
(2)