LM150QML National Semiconductor, LM150QML Datasheet - Page 8
![no-image](/images/manufacturer_photos/0/4/469/national_semiconductor_sml.jpg)
LM150QML
Manufacturer Part Number
LM150QML
Description
LM150 - 3-Amp Adjustable Regulator
Manufacturer
National Semiconductor
Datasheet
1.LM150QML.pdf
(16 pages)
www.national.com
Application Hints
or less and 10 µF capacitance. Figure 3 shows an LM150
D1 protects against C1
D2 protects against C2
Typical Applications
Full output current not available
at high input-output voltages.
1 µF to 1000 µF of aluminum or tantalum electrolytic are commonly used
to provide improved output impedance and rejection of transients.
*Needed if device is more than 6 inches from filter capacitors.
Note: Usually R1 = 240Ω for LM150 and R1 = 120Ω.
†
Optional — improves transient response. Output capacitors in the range of
1.2V–25V Adjustable Regulator
(Continued)
FIGURE 3. Regulator with Protection Diodes
20155701
8
with protection diodes included for use with outputs greater
than 25V and high values of output capacitance.
*Adjust for 3.75V across R1
Precision Power Regulator with Low Temperature
Slow Turn-ON 15V Regulator
20155709
Coefficient
20155714
20155713