LM320H-12 MWC National Semiconductor, LM320H-12 MWC Datasheet - Page 13

• Manufacturer Part Number: LM320H-12 MWC
• Description: LM120/LM320 Series 3-Terminal Negative Regulators; ; Container: Wafer Jar
• Manufacturer: National Semiconductor

Typical Applications
Lead and line regulation — 0.01% temperature stability — 0.2%
†Determines Zener current.
††Solid tantalum.
An LM120-12 or LM120-15 may be used to permit higher input voltages, but the regulated output voltage must be at least −15V when using the LM120-12 and
−18V for the LM120-15.
**Select resistors to set output voltage. 2 ppm/°C tracking suggested.
*Resistor tolerance of R1 and R2 determine matching of (+) and (−) inputs.
**Necessary only if raw supply capacitors are more than 3 from regulators
An LM3086N array may substitute for Q1, D1 and D2 for better stability and
tracking. In the array diode transistors Q5 and Q4 (in parallel) make up D2; sim-
ilarly, Q1 and Q2 become D1 and Q3 replaces the 2N2222.
Variable Output Current Source
Wide Range Tracking Regulator
High Stability 1 Amp Regulator
776709
776707
13
SELECT R2 AS FOLLOWS:
LM120-5 300Ω
LM120-12
LM120-15
*C3 optional. Improves transient response and ripple rejection.
750Ω
1k
Current Source
776706
www.national.com
776708