B156XW02-V0 AUO, B156XW02-V0 Datasheet - Page 4

• Manufacturer Part Number: B156XW02-V0
• Description: LCD Module
• Manufacturer: AUO

www.DataSheet4U.net
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
3) Wipe off water drop immediately. Long contact with water may cause discoloration
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
6) Since CMOS LSI is used in this module, take care of static electricity and insure
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
12) Small amount of materials having no flammability grade is used in the LCD module. The
13)
1. Handling Precautions
B156XW02 V0
Disconnecting power supply before handling LCD modules, it can prevent electric shock,
connector.
or spots.
hard surface.
human earth when handling.
nor tilt the Interface Connector of the TFT Module.
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electrostic breakdown.
Document Ver. : 0.3
AU OPTRONICS CORPORATION
Product Specification
4 of 36