Q403E Banner Engineering Corp., Q403E Datasheet
Q403E
Related parts for Q403E
Q403E Summary of contents
Page 1
... Fixed-Field * Standard 2 m (6.5') cable models are listed. • (30') cable: add suffix “W/30” (e.g., Q403E W/30). • 4-pin Micro-style QD models: add suffix “Q1” (e.g., Q403EQ1). A model with a QD connector requires a mating cable. WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. ...
Page 2
... R2 Figure 1. Fixed-field concept As a general rule, the most reliable sensing of an object approaching from the side occurs when the line of approach is parallel to the sensing axis. Figure 2. Fixed-field sensing axis Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 or ...
Page 3
... Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 Q40 Sensors – ac-Voltage Series Color Sensitivity The effects of object reflectivity on cutoff distance, though small, may be important for some applications expected that at any given cutoff setting, the actual cutoff distance for lower reflectance targets will be slightly shorter than for higher reflectance targets (see Figure-of-Merit information on page 5) ...
Page 4
... All models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency Hz, max., double Shock amplitude 0.06" acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation) Certifications 4 P/N 121515 Specifications Banner Engineering Corp. www.bannerengineering.com • Tel: 763.544.3164 Minneapolis, MN U.S.A. • ...
Page 5
... Performance based on use of a model BRT-3 retroreflector (3" diameter). Actual sensing range may be more or less than specified, depending on the efficiency and reflective area of the retroreflector used. Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 Q40 Sensors – ac-Voltage Series ...
Page 6
... Green LED Yellow LED Power Indicator Output Indicator 50.0 mm (1.97") 19.8 mm (0.78") 82.5 mm (3.25") M30 x 1.5 Thread (Jam Nut Supplied) QD Emitters (4-pin Micro-Style) rd/bk 20-250V ac rd/ connection gn All Other QD Models (4-pin Micro-Style) rd/bk 20-250V ac rd/wh rd Load gn No Connection Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 ...
Page 7
... Right-angle MQAC-430RA WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied ...