AN2757 Freescale Semiconductor / Motorola, AN2757 Datasheet - Page 2

• Manufacturer Part Number: AN2757
• Description: MPC5200 Quick Start
• Manufacturer: Freescale Semiconductor / Motorola

Installation
1.2
Before starting with MPC5200 programming, it is recommended the user gets familiar with 32-bit PowerPC archi-
tecture and G2_LE PowerPC core implementation. The following books are freely available from Freescale (for-
merly Motorola) Literature Distribution Center in the PDF form.
There are also several Application Notes related to the MPC5200 device:
2
The MPC5200_Quick_Start tool setup pack is distributed as a singe self-extracting executable file. Before installing, the Microsoft
Internet Explorer 5.5 or higher must be installed on the host computer. It may also be an advantage if the CodeWarrior MGT
edition is installed before the MPC5200_Quick_Start installation. The Quick Start project stationery is then installed and
integrated directly into the CodeWarrior Environment.
After the MPC5200_Quick_Start is installed, before any project or sample application is opened in the CodeWarrior, the
path to the MPC5200_Quick_Start source code must be registered in the CodeWarrior Development Environment. Unfortunately,
this step can not be automated in the installation process and must be done manually by the user. The actions required are
specified in detail in the “doc\todo_CW.txt” file and are also briefly described in the following section.
2.1
The following procedure registers the MPC5200_Quick_Start source code path in the CodeWarrior Integrated Development
Environment (IDE). This path is used by all projects created from MPC5200_Quick_Start Stationery as well as by all sample
applications.
2
•
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
Programming Environments Manual for 32-Bit Implementations of the PowerPC Architecture (MPCFPE32B/AD) —
Describes resources defined by the PowerPC architecture.
G2 Core Reference Manual (G2CORERM/D) — Describes the G2_LE core used in MPC5200
AN2551: MPC5200 Startup Code.
AN2604: Introduction to BestComm.
AN2458: MPC5200 Local Plus Bus Interface.
Launch the CodeWarrior IDE and select menu “Edit / Preferences”. The “IDE Preferences” dialog window should
appear.
Select “Source Trees” panel in the left-hand side “IDE Preferences Panels” list as displayed in
In the “Name” box, type (exactly) the string “MPC5200_Quick_Start Source” (there is a space before the “Source”
word).
In the “Type” drop-down list, select the “Absolute Path” type.
Click on the “Choose” button and locate the “src” folder in the MPC5200_Quick_Start installation directory. This can be
for example the “C:\Program Files\Freescale (formerly Motorola)\MPC5200_Quick_Start r1.0\src”
Click the “Add” button, the path specified above should be added to the list.
Click “OK” to finish
Suggested Reading
Installation
Configuring CodeWarrior IDE
AN2757 MPC5200 Quick Start and Graphical Configuration Tool
Freescale Semiconductor
Figure
1.