sc23m42 Silan, sc23m42 Datasheet

no-image

sc23m42

Manufacturer Part Number
sc23m42
Description
256-byte Memory Card Ic
Manufacturer
Silan
Datasheet
256-BYTE MEMORY CARD IC
DESCRIPTION
technology. 256 bytes main memory, 32-bit protection memory, 3
bytes user password, and 3-bit password wrong counter (Value:
00000D2D1D0). And the periphery interface is compatible with
ISO7816 agreement (synchronous propagation).
FEATURES
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
SC23M42 is a smart card module utilizing CMOS EEPROM
* 256 X 8 bit EEPROM
* Byte addressing
* Write-protect area (former 32 bytes) can execute the write-protect
* 32 X 1bit protect memory
* Serial two buses interface
* More than 100,000 times write endurance cycles
* Data retention of more than 10 years
* Contact definition and serial interface comply to ISO7816
* 3 Bytes user password, 3 bits(bit0-bit2) error counter
* Before the password is checked, all the data can be read; if the
* Password error counter, and the initial value is 3. Checking the
* Comply to SLE4442
separately, and after the write-protect, the content cannot be
changed.
password once, subtracts 1, if the value of the counter is 0, the
memory card will be locked automatically, and the data can only
be read, the password cannot be checked again; When the value
of the counter is not 0, if the password checking is correct for one
time, the value comes back to initial value.
specification (synchronous propagation)
password is correct, you can write or amend the data and the
password.
ORDERING INFORMATION
APPLICATIONS
SC23M42A
SC23M42B
* used for various IC memory cards.
Device
REV:1.0
P6-05
MCTS012402
Package
SC23M42
Page 1 of 11
2006.07.21

Related parts for sc23m42

sc23m42 Summary of contents

Page 1

... MEMORY CARD IC DESCRIPTION SC23M42 is a smart card module utilizing CMOS EEPROM technology. 256 bytes main memory, 32-bit protection memory, 3 bytes user password, and 3-bit password wrong counter (Value: 00000D2D1D0). And the periphery interface is compatible with ISO7816 agreement (synchronous propagation). FEATURES ...

Page 2

... Interface GND I/O Symbol Ratings -40~125 stg =5V amb Condition Symbol OSC SC23M42 Program control RST CLK Unit -0.3~6 -0.3 Min. Typ. Max. Unit 2 0.5 1 ...

Page 3

... GND CC RST CLK (Contact of the card) Description Power supply voltage is 5V Reset signal Clock signal No connect Ground No connect Data bus(open-drain output) No connect SC23M42 Min. Typ. Max. Unit ...

Page 4

... FUNCTION DESCRIPTIONS SC23M42 provides 256×8 bits EEPROM memory units and 32×1 protect units, and there is writing-protect for the former 32-bit bytes. Except PSC (Programmable Security Code) memory unit, all units are readable. The unit can be erased and written before the write-protect is active, or else the unit is only readable after the write-protect. ...

Page 5

... Figure 2 Command input time sequence Control 30H SC23M42 Operation Method Output data Process Output data Process Output data Process authentication Process IFD Sets I/O to level Address Data A7… ...

Page 6

... Address 38H 00H… FFH Control effect 34H No effect SC23M42 Address Data A7… A0 D7… D0 Input data Input data Address Data A7… A0 D7… effect No effect REV:1.0 2006.07.21 Page ...

Page 7

... No effect 31H No effect Control Address 39H 00H… 03H SC23M42 Address Data A7… A0 D7… D0 Input data Input data Address Data A7… A0 D7… effect No effect Address Data A7… A0 D7… D0 Input data Input data REV:1 ...

Page 8

... Hex Validate the appointed byte of PSC each time. 4. Password authentication The SC23M42 is only readable without PSC authentication. The content of PSC cannot be read, if you try to read PSC, you will get “ 00” . The authentication steps are as follows: --Write to one bit of the error counter (EC) which has not been written, and the EC address is“ 00” ; ...

Page 9

... HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn Figure8 PSC authentication flow chart SC23M42 REV:1.0 2006.07.21 Page ...

Page 10

... PACKAGE OUTLINE P6-05 MCTS012402 HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn SC23M42 UNIT: mm UNIT: mm REV:1.0 2006.07.21 Page ...

Page 11

... Persons at a work bench should be earthed via a wrist strap. Equipment cases should be earthed. All tools used during assembly, including soldering tools and solder baths, must be earthed. MOS devices should be packed for dispatch in antistatic/conductive containers. HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn SC23M42 REV:1.0 2006.07.21 Page ...

Related keywords