mmdoe28gxmsp-0va Samsung Semiconductor, Inc., mmdoe28gxmsp-0va Datasheet - Page 27

• Manufacturer Part Number: mmdoe28gxmsp-0va
• Description: Samsung Pm410 Ssd 1.8 Lif 128/64gb
• Manufacturer: Samsung Semiconductor, Inc.

7.3.2.7 Off-line data collection capability
Bit
0
1
2
3
4
5
6
7
7.3.2.8 S.M.A.R.T. Capability
This word of bit flags describes the S.M.A.R.T. capabilities of the device. The device will return 03h indicating that the device will save its
Attribute Values prior to going into a power saving mode and supports the S.M.A.R.T. ENABLE/DISABLE ATTRIBUTE AUTOSAVE command.
Bit
0
1
2-15
7.3.2.9 Error logging capability
Bit
7-1
0
7.3.2.10 Self-test failure check point
This byte indicates the section of self-test where the device detected a failure.
7.3.2.11 Self-test completion time
These bytes are the minimum time in minutes to complete the self-test.
7.3.2.12 Data Structure Checksum
The Data Structure Checksum is the 2's compliment of the result of a simple 8-bit addition of the first 511 bytes in the data structure.
MMCRE64GXMSP-0VA
MMDOE28GXMSP-0VA
Off-line Read Scanning implemented bit
Execute Off-line Immediate implemented bit
0
1
Enable/disable Automatic Off-line implemented bit
0
1
Abort/restart off-line by host bit
0
1
0
1
Self-test implemented bit
0
1
Reserved (0)
Selective self-test routine is not implemented
0
1
Reserved (0)
Definition
Reserved (0)
Reserved (0)
Definition
Pre-power mode attribute saving capability. If bit = 1, the device will save its Attribute Values prior to going into a power
saving mode (Standby or Sleep mode).
Attribute auto save capability. If bit = 1, the device supports the S.M.A.R.T. ENABLE/ DISABLE ATTRIBUTE AUTOSAVE
command.
The Error Logging support bit. If bit = 1, the device supports the Error Logging
Definition
S.M.A.R.T. Execute Off-line Immediate subcommand is not implemented
S.M.A.R.T. Execute Off-line Immediate subcommand is implemented
S.M.A.R.T. Enable/disable Automatic Off-line subcommand is not implemented
S.M.A.R.T. Enable/disable Automatic Off-line subcommand is implemented
The device will abort off-line data collection activity upon receipt of a new command Bit Definition
The device does not support Off-line Read Scanning
The device supports Off-line Read Scanning
Self-test routing is not implemented
Self-test routine is implemented
Selective self-test routine is not implemented
Selective self-test routine is implemented
The device will suspend off-line data collection activity after an interrupting command and resume it after a vendor
specific event
27
Revision 1.0
Final