s7010-s7011-s7015 Hamamatsu Photonics, K.K.,, s7010-s7011-s7015 Datasheet - Page 10

• Manufacturer Part Number: s7010-s7011-s7015
• Description: Ccd Area Image Sensor
• Manufacturer: Hamamatsu Photonics, K.K.,

10
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
I Specifications of built-in temperature sensor
I Precaution for use (Electrostatic countermeasures)
G Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with
G Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.
G Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to
G Ground the tools used to handle these sensors, such as tweezers and soldering irons.
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
I Element cooling/heating temperature incline rate
Element cooling/heating temperature incline rate should be set at less than 5 K/min.
l
l
l
l
l
an earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
discharge.
Features
C7020: for S7010 series
C7021: for S7011 series
C7025: for S7015 series
Area scanning or full line-binnng operation
Readout frequency: 250 kHz
Readout noise: 20 e - rms
∆T=50 ˚C (∆T changes by radiation method.)
W
f
f
CCD area image sensor
Multichannel detector head (C7020, C7021, C7025)
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2003 Hamamatsu Photonics K.K.
S7010/S7011/S7015 series
100 kΩ
10 kΩ
1 MΩ
220
240
TEMPERATURE (K)
260
(Typ. Ta=25 ˚C)
280
Cat. No. KMPD1022E09
Feb. 2003 DN
300
KMPDB0111EA