p16c185-01bq Pericom Semiconductor Corporation, p16c185-01bq Datasheet - Page 5

• Manufacturer Part Number: p16c185-01bq
• Description: 3.3v, 140mhz Mobile Pc 1 5 Output Clock Driver With Edge Rate Control
• Manufacturer: Pericom Semiconductor Corporation

1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2
Minimum and Maximum Expected Capacitive Loads
Notes:
1. Maximum rise/fall times are guaranteed at maximum specified load.
2. Minimum rise/fall times are guaranteed at minimum specified load.
3. Rise/fall times are specified with pure capacitive load as shown.
Design Guidelines to Reduce EMI
1. Place R
2. Minimize the number of “vias” of the clock traces.
3. Route clock traces over a continuous ground plane or over a continuous power plane. Avoid routing
4. Position clock signals away from signals that go to any cables or any external connectors.
Testing is done with an additional 500 resistor in parallel.
value for CI is 10pF. R
and fall time are still within the specified values.
clock traces from plane to plane (refer to rule #2).
S
series resistors and CI capacitors as close as possible to the respective clock pins. Typical
S
Series resistor value can be increased to reduce EMI provided that the rise
Figure 1. Clock Waveforms
5
Precision 1-5 Clock Buffer
PI6C185-01B
PS8466
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15