p-2.5dbqs-cr1-d1 DDK Ltd., p-2.5dbqs-cr1-d1 Datasheet - Page 17

• Manufacturer Part Number: p-2.5dbqs-cr1-d1
• Description: Sma Style Coaxial Connector
• Manufacturer: DDK Ltd.

1
2
3
4
5
6
7
○ Assembly Instruction（10）
Cable
Crimping Dies
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
Parts Configuration
Sheath
Ferule
Cable
Spread the top
Ｌ
Ｌ1
DM Series
11.0
Nut
Ferule
Outer Conductor Aluminum foil tape
6.0
Ferule
1.8
Center Conductor
Pre-soldering
Body
Contact Slit
Body
Soldering
Contact
17
1. The cable length require for the cable assembly.
（Note）Center conductor is caught in the
（Note）Aluminum foil tape is inserted in the
（Note）The gap between body and ferule is
（Note）Please be careful to not damage the
2. Cut the cable as fig.2.
2-1. Pre-solder the center conductor.
3. Insert the ferule into the cable.
4. Spread the top of the outer conductor.
4-2. Insert the body into the cable between
outer conductor and aluminum foil tape.
5. Cover the ferule on the naked outer
5-1. Crimp the ferule. (Crimping Dies : RFD-1)
6. Solder the contact with center conductor.
7. Screw up the nut on the body.
Nut
L=L
conductor.
Screw torque 9.8N・cm（1Kgf・cm）
1
+0.5
outer conductor and center conductor.
contact slit enough.
body.
within 0.5.
Unit：mm