ltl-4253-042 LiteOn Technology Corp., ltl-4253-042 Datasheet - Page 9

• Manufacturer Part Number: ltl-4253-042
• Description: Thru-hole Led Lamps 5mm Round Allngap/gap/gaasp Yellow Ltl-4253-042
• Manufacturer: LiteOn Technology Corp.

6. Drive Method
7. ESD (Electrostatic Discharge)
Part No. : LTL-4253-042
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
Suggestions to prevent ESD damage:
of those LEDs
Static Electricity or power surge will damage the LED.
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
(A) Recommended circuit
Use a conductive wrist band or anti- electrostatic glove when handling these LEDs
All devices, equipment, and machinery must be properly grounded
Work tables, storage racks, etc. should be properly grounded
plastic lens as a result of friction between LEDs during storage and handing
Use ion blower to neutralize the static charge which might have built up on surface of the LEDs
Circuit model A
LED
LITE-ON TECHNOLOGY CORPORATION
P r o p e r t y o f L i t e - O n O n l y
Circuit model B
LED
Page :
9
of
11