s908qc16g0cdte Freescale Semiconductor, Inc, s908qc16g0cdte Datasheet - Page 122

• Manufacturer Part Number: s908qc16g0cdte
• Description: M68hc08 Family Of 8-bit Microcontroller Units Mcus
• Manufacturer: Freescale Semiconductor, Inc

Timer Interface Module (TIM)
14.3.3.2 Buffered Output Compare
Channels 0 and 1 can be linked to form a buffered output compare channel whose output appears on the
TCH0 pin. The TIM channel registers of the linked pair alternately control the output.
Setting the MS0B bit in TIM channel 0 status and control register (TSC0) links channel 0 and channel 1.
The output compare value in the TIM channel 0 registers initially controls the output on the TCH0 pin.
Writing to the TIM channel 1 registers enables the TIM channel 1 registers to synchronously control the
output after the TIM overflows. At each subsequent overflow, the TIM channel registers (0 or 1) that
control the output are the ones written to last. TSC0 controls and monitors the buffered output compare
function, and TIM channel 1 status and control register (TSC1) is unused. While the MS0B bit is set, the
channel 1 pin, TCH1, is available as a general-purpose I/O pin.
14.3.4 Pulse Width Modulation (PWM)
By using the toggle-on-overflow feature with an output compare channel, the TIM can generate a PWM
signal. The value in the TIM counter modulo registers determines the period of the PWM signal. The
channel pin toggles when the counter reaches the value in the TIM counter modulo registers. The time
between overflows is the period of the PWM signal.
As
of the PWM signal. The time between overflow and output compare is the pulse width. Program the TIM
to clear the channel pin on output compare if the polarity of the PWM pulse is 1 (ELSxA = 0). Program the
TIM to set the pin if the polarity of the PWM pulse is 0 (ELSxA = 1).
The value in the TIM counter modulo registers and the selected prescaler output determines the
frequency of the PWM output The frequency of an 8-bit PWM signal is variable in 256 increments. Writing
$00FF (255) to the TIM counter modulo registers produces a PWM period of 256 times the internal bus
clock period if the prescaler select value is 000. See
122
Figure 14-3
the end of the current pulse) could cause two output compares to occur in the same counter
overflow period.
POLARITY = 1
POLARITY = 0
(ELSxA = 0)
(ELSxA = 1)
In buffered output compare operation, do not write new output compare
values to the currently active channel registers. User software should track
the currently active channel to prevent writing a new value to the active
channel. Writing to the active channel registers is the same as generating
unbuffered output compares.
shows, the output compare value in the TIM channel registers determines the pulse width
T1CHx
T1CHx
OVERFLOW
Figure 14-3. PWM Period and Pulse Width
MC68HC08QY/QT Family Data Sheet, Rev. 2
PULSE
WIDTH
PERIOD
COMPARE
OUTPUT
OVERFLOW
NOTE
14.8.1 TIM Status and Control
COMPARE
OUTPUT
OVERFLOW
Freescale Semiconductor
Register.
COMPARE
OUTPUT