sx8636 Semtech Corporation, sx8636 Datasheet - Page 22

no-image

sx8636

Manufacturer Part Number
sx8636
Description
Low Power, Capacitive Button Touch Controller 8 Sensors With Enhanced Led Drivers And Proximity Sensing
Manufacturer
Semtech Corporation
Datasheet
ADVANCED COMMUNICATIONS & SENSING
3.15 Interrupt
3.15.1 Power up
During power up the INTB is kept low. Once the power up sequence is terminated the INTB is released
autonomously. The SX8636 is then ready for operation.
During the power on period the SX8636 stabilizes the internal regulators, RC clocks and the firmware initializes all
registers.
During the power up the SX8636 is not accessible and I2C communications are forbidden.
As soon as the INTB rises the SX8636 will be ready for I2C communication.
3.15.2 Assertion
INTB is updated in Active or Doze mode once every scan period.
The INTB will be asserted: at the following events:
3.15.3 Clearing
INTB is updated in Active or Doze mode once every scan period.
The clearing of the INTB is done as soon as the host performs a read to the IrqSrc I2C register or reset is
completed.
Revision 7_5, September 10
• if a Button event occurred (touch or release if enabled). I2C register CapStatLsb show the detailed status of
• if a GPI edge occurred (rising or falling if enabled). I2C register GpiStat shows the detailed status of the GPI
• when actually entering Active or Doze mode either through automatic wakeup or via host request (may be
• once compensation procedure is completed either through automatic trigger or via host request (may be
• once SPM write is effective (may be delayed by 1 scan period),
• once NVM burn procedure is completed (may be delayed by 1 scan period),
• during reset (power up, hardware RESETB, software reset).
the Buttons,
pins,
delayed by 1 scan period). I2C register CompOpmode shows the current operation mode,
delayed by 1 scan period),
Figure 19
© 2010 Semtech Corp.
Low Power, Capacitive Button Touch Controller (8 sensors)
Power Up vs. INTB
with Enhanced LED Drivers and Proximity Sensing
22
DATASHEET
www.semtech.com
SX8636

Related parts for sx8636