at22lv10 ATMEL Corporation, at22lv10 Datasheet - Page 2

• Manufacturer Part Number: at22lv10
• Description: At22lv10 Low-voltage Uv Erasable Programmable Logic Device
• Manufacturer: ATMEL Corporation

Full CMOS output levels help reduce power in many other
system components.
The AT22LV10 and AT22LV10L logic architectures are
identical to the familiar 22V10. Each output is allocated
from eight to 16 product terms, which allows highly
complex logic functions to be realized.
Two additional product terms are included to provide
synchronous preset and asynchronous reset. These terms
are common to all ten registers. All registers are automati-
cally cleared upon power-up.
Register preload simplifies testing. A security fuse prevents
unauthorized copying of programmed fuse patterns.
Absolute Maximum Ratings*
*NOTICE:
Note:
DC and AC Operating Conditions
2
Temperature Under Bias................................ -55°C to +125°C
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground ........................................-2.0V to +7.0V
Voltage on Input Pins
with Respect to Ground
During Programming....................................-2.0V to +14.0V
Programming Voltage with
Respect to Ground ......................................-2.0V to +14.0V
Integrated UV Erase Dose..............................7258 W
Operating Temperature (Ambient)
V
CC
Power Supply
1. Minimum voltage is -0.6V DC which may undershoot
to -2.0V for pulses of less than 20 ns. Maximum pin
voltage is V
V
Stresses beyond those listed under “Absolute Maxi-
mum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional
operation of the device at these or any other condi-
tions beyond those indicated in the operational
sections of this specification is not implied. Expo-
sure to absolute maximum rating conditions for
extended periods may affect device reliability.
CC
+ 2.0V for pulses of less than 20 ns.
AT22LV10(L)
CC
+ 0.75V DC which may undershoot to
•
sec/cm
Commercial
3.0V to 5.5V
0°C - 70°C
(1)
(1)
(1)
2
Logic Options
Output Options
-40°C - 85°C
3.0V to 5.5V
Industrial