sx8725 Semtech Corporation, sx8725 Datasheet - Page 17
sx8725
Manufacturer Part Number
sx8725
Description
Sx8725 Zoomingadc? For Pressure And Temperature Sensing
Manufacturer
Semtech Corporation
Datasheet
1.SX8725.pdf
(53 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
sx8725CWLTDT
Manufacturer:
Semtech
Quantity:
3 377
Company:
Part Number:
sx8725E083TDT
Manufacturer:
Semtech
Quantity:
1 996
Company:
Part Number:
sx8725E083TDT
Manufacturer:
STM
Quantity:
2 083
ADVANCED COMMUNICATIONS & SENSING
Registers
The system has a bank of eight 8-bit registers: six registers are used to configure the acquisition chain
(RegAcCfg0 to 5), and two registers are used to store the output code of the analog-to-digital conversion
(RegAcOutMsb & Lsb).
With:
V1.5 © 2007 Semtech Corp.
RegACOutLsb
RegACOutMsb
RegACCfg0
Default values:
RegACCfg1
Default values:
RegACCfg2
Default values:
RegACCfg3
Default values:
RegACCfg4
Default values:
RegACCfg5
Default values:
Register Name
(r = read; w = write; rw = read & write)
OUT: (r) digital output code of the analog-to-digital converter. (MSB = OUT[15])
START: (w) setting this bit triggers a single conversion (after the current one is finished). This bit always reads back 0.
SET_NELC: (rw) sets the number of elementary conversions to 2 SET_NELC[1:0]. To compensate for offsets, the input signal is
chopped between elementary conversions (1,2,4,8).
SET_OSR: (rw) sets the over-sampling rate (OSR) of an elementary conversion to 2(3+SET_OSR[2:0]). OSR = 8, 16, 32, ..., 512,
1024.
CONT: (rw) setting this bit starts a conversion. A new conversion will automatically begin as long as the bit remains at 1.
TEST: bit only used for test purposes. In normal mode, this bit is forced to 0 and cannot be overwritten.
IB_AMP_ADC: (rw) sets the bias current in the ADC to 0.25*(1+ IB_AMP_ADC[1:0]) of the normal operation current (25, 50, 75 or
100% of nominal current). To be used for low-power, low-speed operation.
IB_AMP_PGA: (rw) sets the bias current in the PGAs to 0.25*(1+IB_AMP_PGA[1:0]) of the normal operation current (25, 50, 75 or
100% of nominal current). To be used for low-power, low-speed operation.
ENABLE: (rw) enables the ADC modulator (bit 0) and the different stages of the PGAs (PGAi by bit i=1,2,3). PGA stages that are
disabled are bypassed.
FIN: (rw) These bits set the over sampling frequency of the acquisition chain. Expressed as a fraction of the oscillator frequency,
the sampling frequency is given as: 11
PGA1_GAIN: (rw) sets the gain of the first stage: 0
PGA2_GAIN: (rw) sets the gain of the second stage: 00
PGA3_GAIN: (rw) sets the gain of the third stage to PGA3_GAIN[6:0] 1/12.
PGA2_OFFSET: (rw) sets the offset of the second stage between –1 and +1, with increments of 0.2. The MSB gives the sign
(0
PGA3_OFFSET: (rw) sets the offset of the third stage between –5.25 and +5.25, with increments of 1/12. The MSB gives the sign
(0
BUSY: (r) set to 1 if a conversion is running.
DEF: (w) sets all values to their defaults (PGA disabled, max speed, nominal modulator bias current, 2 elementary conversions,
over-sampling rate of 32) and starts a new conversion without waiting the end of the preceding one.
AMUX(4:0): (rw) AMUX(4) sets the mode (0
sets the sign (0
VMUX: (rw) sets the differential reference channel (0
positive, 1
positive, 1
Table 1 - Peripheral Registers to Configure the Acquisition Chain (AC)
straight, 1
negative); amplitude is coded with the bits PGA2_OFFSET[5:0].
negative); amplitude is coded with the bits PGA3_OFFSET[5:0].
and to Store the Analog-to-Digital Conversion (ADC) Result
PGA1_G
START
IB_AMP_ADC[1:0]
BUSY
7
0
0
0
0
-
FIN[1:0]
11
00
cross) AMUX(2:0) sets the channel.
DEF
SET_NELC[1:0]
6
0
ZoomingADC™ for Pressure and Temperature Sensing
500 kHz, 10
01
IB_AMP_PGA[1:0]
differential inputs, 1
PGA2_GAIN[1:0]
5
1, 1
11
00
V
17
250 kHz, 01
BATT
1, 01
10.
, 1
4
V
SET_OSR[2:0]
2, 10
Bit Position
REF
AMUX[4:0]
OUT[15:8]
OUT[7:0]
single ended inputs with A
PGA3_OFFSET[6:0]
00000
).
PGA3_GAIN[6:0]
125 kHz, 00
010
3
5, 11
0001100
0000000
10.
2
62.5 kHz.
PGA2_OFFSET[3:0]
ENABLE[3:0]
CONT
0
0000
0000
1
= common reference) AMUX(3)
0
www.semtech.com
VMUX
SX8725
0
0
0
-