at27c080 ATMEL Corporation, at27c080 Datasheet - Page 9

• Manufacturer Part Number: at27c080
• Description: 8-megabit 1m X 8 Otp Eprom
• Manufacturer: ATMEL Corporation

18. Rapid Programming Algorithm
0360L–EPROM–12/07
A 50 µs CE pulse width is used to program. The address is set to the first location. V
raised to 6.5V and OE/V
50 µs CE pulse without verification. Then a verification reprogramming loop is executed for
each address. In the event a byte fails to pass verification, up to 10 successive 50 µs pulses
are applied with a verification after each pulse. If the byte fails to verify after 10 pulses have
been applied, the part is considered failed. After the byte verifies properly, the next address is
selected until all have been checked. OE/V
are read again and compared with the original data to determine if the device passes or fails.
PP
is raised to 13.0V. Each address is first programmed with one
PP
is then lowered to V
IL
and V
CC
AT27C080
to 5.0V. All bytes
CC
is
9