ice3ar4780jz Infineon Technologies Corporation, ice3ar4780jz Datasheet - Page 2

• Manufacturer Part Number: ice3ar4780jz
• Description: Off-line Smps Current Mode Controller With Integrated 800v Coolmos And Startup Cell Brownout & Frequency Jitter In Dip- 7
• Manufacturer: Infineon Technologies Corporation

®
CoolSET
-F3R80
ICE3AR4780JZ
Revision History:
2010-8-26
Datasheet
Previous Version: 1.0
Page
Subjects (major changes since last revision)
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon
Technologies Companies and Representatives worldwide: see our webpage at http://www.infineon.com
®
®
CoolMOS
, CoolSET
are trademarks of Infineon Technologies AG.
Edition 2010-8-26
Published by
Infineon Technologies AG
81726 München, Germany
©
Infineon Technologies AG 8/26/10.
All Rights Reserved.
Attention please!
The information given in this data sheet shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values
stated herein and/or any information regarding the application of the device, Infineon Technologies hereby
disclaims any and all warranties and liabilities of any kind, including without limitation warranties of
non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.