lm2612abpx National Semiconductor Corporation, lm2612abpx Datasheet - Page 19

• Manufacturer Part Number: lm2612abpx
• Description: 400ma Sub-miniature, Programmable, Step-down Dc-dc Converter For Ultra Low-voltage Circuits
• Manufacturer: National Semiconductor Corporation

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
BANNED SUBSTANCE COMPLIANCE
National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification
(CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Physical Dimensions
NOTES: UNLESS OTHERWISE SPECIFIED
1. EPOXY COATING
2. 63Sn/37Pb EUTECTIC BUMP
3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.
4. PIN 1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION. REMAINING PINS ARE NUMBERED COUNTER
CLOCKWISE.
5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X1 IS PACKAGE WIDTH, X2 IS PACKAGE LENGTH AND X3 IS
PACKAGE HEIGHT.
6.NO JEDEC REGISTRATION AS OF SEPT. 2000.
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Americas Customer
Support Center
Email: [e-mail]
Tel: [phone]
National Semiconductor
Europe Customer Support Center
Deutsch Tel: [phone]
English
Français Tel: [phone]
inches (millimeters) unless otherwise noted
The dimensions for X1, X2 and X3 are as given:
Email: [e-mail]
Fax: [phone]
Tel: [phone]
10-Bump micro SMD Package
NS Package Number BPA10
X1 = 1.996 +/− 0.030mm
X2 = 2.504 +/− 0.030mm
X3 = 0.850 +/− 0.1mm
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Support Center
Email: [e-mail]
National Semiconductor
Japan Customer Support Center
Fax: [phone]