pa025xsb AZ Displays, Inc, pa025xsb Datasheet - Page 23

• Manufacturer Part Number: pa025xsb
• Description: 2.5inch Color Tft-lcd Panel.
• Manufacturer: AZ Displays, Inc

11. Handling Cautions
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not
be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View
International Co., Ltd.
11-1) Mounting of module
11-2) Precautions in mounting
11-3) Others
c) Polarizer which is made of soft material and susceptible to flaw must be handled
d) Protective film (Laminator) is applied on surface to protect it against scratches
a) Please power off the module when you connect the input/output connector.
b) Please connect the ground pattern of the inverter circuit surely. If the connection
a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled,
b) Wipe off water drops or finger grease immediately. Long contact with water may
c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped
d) Since CMOS LSI is used in the module. So take care of static electricity and
a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many
b) Store the module at a room temperature place.
c) The voltage of beginning electric discharge may over the normal voltage because
d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.
e) Observe all other precautionary requirements in handling general electronic
f) Please adjust the voltage of common electrode as material of attachment by 1
1.The noise from the backlight unit will increase.
2.The output from inverter circuit will be unstable.
3.In some cases a part of module will heat.
carefully.
and dirt. It is recommended to peel off the laminator before use and taking care
of static electricity.
is not perfect, some following problems may happen possibly.
wipe it with soft dry cloth.
cause discoloration or spots.
on hard surface. Please handle with care.
earth yourself when handling.
Hours.
of leakage current from approach conductor by to draw lump read lead line
around.
Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes
or feet. Wash it out immediately with soap.
components.
module.
PA025XSB
Page:23