s-120cl OSI Optoelectronics, s-120cl Datasheet

no-image

s-120cl

Manufacturer Part Number
s-120cl
Description
Planar Diffused Silicon Photodiodes
Manufacturer
OSI Optoelectronics
Datasheet
42
Solderable Chip Series
Planar Diffused Silicon Photodiodes
The Solderable photodiode chip series offer a low cost approach to
applications requiring large active area photodetectors with or without
flying leads for ease of assembly and / or situations where the detector
is considered “disposable”. They have low capacitance, moderate dark
currents, wide dynamic ranges and high open circuit voltages. These
and back (cathode). There are two types of photodiode chips available.
detectors are available with two 3" long leads soldered to the front (anode)
“Photoconductive” series, (SXXCL) for low capacitance and fast response
and “Photovoltaic” series (SXXVL) for low noise applications.
All of the devices are also available in chip form without any leads. For
ordering subtract suffix ‘L’ from the model number, e.g. S-100C.
For large signal outputs, the detectors can be connected directly to a
current meter or across a resistor for voltage measurements. Alternately,
the output can be measured directly with an oscilloscope or with an
amplifier. Please refer to the “Photodiode Characteristics” section for
further details.
n
• Solar Cells
• Low Cost Light Monitoring
• Diode Laser Monitoring
• Low Capacitance
APPLICATIONS
n
• Large Active Areas
• Various Sizes
• High Shunt Resistance
• With or Without Leads
FEATURES

Related parts for s-120cl

s-120cl Summary of contents

Page 1

... There are two types of photodiode chips available. “Photoconductive” series, (SXXCL) for low capacitance and fast response and “Photovoltaic” series (SXXVL) for low noise applications. All of the devices are also available in chip form without any leads. For ordering subtract suffix ‘L’ from the model number, e.g. S-100C. For large signal outputs, the detectors can be connected directly to a current meter or across a resistor for voltage measurements ...

Page 2

... S-25VRL S-50CL 51.0 2.5 x 20.3 (0.079) (0.10 x 0.80) S-50VL S-80CL 82.6 4.1 x 20.1 (0.128) (0.16 x 0.79) S-80VL S-100CL 93.4 9.7 x 9.7 (0.145) (0.38 x 0.38) S-100VL S-120CL 105.7 4.5 x 23.5 (0.164) (0.18 x 0.93) S-120VL S-200CL 189.0 9.2 x 20.7 (0.293) (0.36 x 0.81) S-200VL § All of the above bare chips are provided with two 3" long 29-30 AWG insulated color coded leads attached to the front for anode (RED) and to the back for Cathode (BLACK). They are also available in chip form only (Leadless). For Ordering subtract Suffix ‘L’ from the Model Number, i.e. S-100C. =23ºC A Peak Responsivity Responsivity at λ λ λ λ ...

Related keywords