sky67105-306lf Skyworks Solutions, Inc., sky67105-306lf Datasheet - Page 7

• Manufacturer Part Number: sky67105-306lf
• Description: Sky67105-306lf 0.6-1.1 Ghz Two-stage, High Linearity And High Gain Low-noise Amplifier
• Manufacturer: Skyworks Solutions, Inc.

Evaluation Board Description
The SKY67105-306LF Evaluation Board is used to test the
performance of the SKY67105-306LF two-stage LNA. An
Evaluation Board schematic diagram is provided in Figure 16.
Table 5 provides the Evaluation Board Bill of Materials. An
assembly drawing for the Evaluation Board is shown in Figure 17.
Package Dimensions
The PCB layout footprint for the SKY67105-306LF is shown in
Figure 18. Typical case markings are noted in Figure 19. Package
dimensions for the 16-pin QFN are shown in Figure 20, and tape
and reel dimensions are provided in Figure 21.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201518A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 15. 2011
Figure 15. Noise Figure vs Frequency Over Temperature
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
THE SKY67105-306LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
DATA SHEET • SKY67105-306LF TWO-STAGE LNA
7