jsh-01lwaa1 ETC-unknow, jsh-01lwaa1 Datasheet - Page 21

• Manufacturer Part Number: jsh-01lwaa1
• Description: Gigabit Ethernet 1310 Limiting Transceiver, Reach
• Manufacturer: ETC-unknow

21
4.2 Package and Handling Instructions
This product is not compatible with any aqueous wash process.
Process plug
The JSH-01LWAx1 optical transceiver is supplied with a process plug. This plug
protects the transceiver’s optics during standard manufacturing processes by pre-
venting contamination from air borne particles.
Note: It is recommended that the dust cover remain in the transceiver whenever an
optical fiber connector is not inserted.
Recommended cleaning and de-greasing chemicals
JDSU recommends the use of methyl, isopropyl and isobutyl alcohols for cleaning.
Do not use halogenated hydrocarbons (trichloroethane, ketones such as acetone,
chloroform, ethyl acetate, MEK, methylene chloride, methylene dichloride, phenol,
N-methylpyrolldone).
Flammability
The housing is made of cast zinc and sheet metal.
4.3 Electrostatic Discharge (ESD)
Handling
Normal ESD precautions are required during the handling of this module. This
transceiver is shipped in ESD protective packaging. It should be removed from the
packaging and handled only in an ESD protected environment utilizing standard
grounded benches, floor mats, and wrist straps.
Test and operation
In most applications, the optical connector will protrude through the system chas-
sis and be subjected to the same ESD environment as the system. Once properly
installed in the system, this transceiver should meet and exceed common ESD
testing practices and fulfill system ESD requirements.
Typical of optical transceivers, this module’s receiver contains a highly sensitive
optical detector and amplifier which may become temporarily saturated during
an ESD strike. This could result in a short burst of bit errors. Such an event may
require the application to reacquire synchronization at the higher layers (serial-
izer/deserializer chip).
10 GIGABIT ETHERNET SFP+ 1310 NM
LIMITING TRANSCEIvER, 10 KM REACH