v500-r521c2 Omron Corporation, v500-r521c2 Datasheet - Page 3

no-image

v500-r521c2

Manufacturer Part Number
v500-r521c2
Description
Compact Laser Bar Code Reader
Manufacturer
Omron Corporation
Datasheet
Ordering information
Ratings and Performance
General Specifications
Note 1. Unless otherwise specified, specifications are for a bar code set to JAN 1 with an MRD of 63% or higher (a PCS value of 0.9 or higher) is used with the pitch angle
System Configuration
V500-R521B2 (Cable Output)
The cable end has loose wires.
Bar Code Readers
Cables (sold separately)
Applicable
bar codes
Reading
performance
(See note 1.)
Interfaces
Function setting method
Read trigger
Read results
output
Power supply
specifications
Environment
Enclosure rating
Weight
I/O connector
Cable length
2. The power supply voltage is specified at the I/O connector of the Bar Code Reader
( ) set to 0 , the skew angle ( ) set to 15 , the tilt angle ( ) set to 0 , and the curvature (R) set to infinity.
Bar Code Reader
V500-R521B2
Type of bar code
Number of read digits
Resolution
Contrast (PCS value)
Reading distance
Reading angle
Skew angle
Pitch angle
Light source
Optical output
Scan type
Number of scans
Number of read repetitions
Reading verification
Communications specifications
OK/NG output
(V500-R521B2 only)
RS-232C output
OK/NG signal
(V500-R521B2 only)
LED indicators
Buzzer
Power supply voltage
Current consumption
Inrush current
Ambient temperature
Ambient humidity
Vibration resistance
Allowable ambient light
Cable output
Round DIN connector
SYSMAC D-sub 9-pin cable, 0.8 m
SYSMAC D-sub 9-pin cable, 5 m
IBM PC/AT or compatible D-sub 9-pin cable, 0.8 m
IBM PC/AT or compatible D-sub 9-pin cable, 5 m
Power supply (5 VDC)
Recommended model:
S8VS-01505
Personal computer
(IBM PC/AT or compatible)
Product
Programmable
Controller
Code 39, NW-7, ITF,
STF (2 of 5 bars), Code 93, Code 128 (including EAN128), EAN/UPC (A and E)
32 digits max. (depends on bar width and read size)
0.15 mm (for PCS0.9)
0.45 min. (70% white reflectance min.)
60 to 270 mm (with 1.0-mm thin bar)
Within 40 (including left and right margins)
Red laser diode (wavelength: 650 nm)
1.0 mW max.
Raster scan
500 scans/s
2 to 6 times
Buzzer and LED indicators
RS-232C
30 mA at 24 VDC, NPN open-collector output
Menu sheet reading or host commands
Read data is output.
The OK signal turns ON when reading is successful.
The NG signal turns ON when reading fails.
The OK indicator lights when reading is successful.
The NG indicator lights when reading fails.
The buzzer sounds when reading is successful. (The buzzer can be muted.)
5 VDC
220 mA typ. (330 mA max.)
2.5 A max.
Operating: 0 to 45 C, Storage: 10 C to 60 C (with no icing or condensation)
Operating and storage: 30% to 85% (with no icing or condensation)
12 to 100 Hz, 19.6 m/s
3,000 lx max. (fluorescent light; excluding inverter fluorescent lighting)
IP54 (IEC 60529 standard)
80 g (excluding cable and connector)
V500-R521B2: Cable output
V500-R521C2: DIN 8-pin connector
2 m
50 (excluding the upper 10 and lower 5 ranges)
25 (25 right and left)
External trigger (transistor input)
Trigger by command (RS-232C)
Test read trigger with the TEST Button on the Reader
10% (See note 2.)
V500-R521C2 (Connector Output)
The cable end has a connector.
Prepare a connecting cable suitable for the host.
Bar Code Reader
V500-R521C2
2
acceleration in X, Y, and Z directions for 3 hours each
Connection cable for
IBM PC/AT or compatible
V509-W011D
OMRON
Programmable Controller
Connecting Cable
V509-W011
V500-R521B2
V500-R521C2
V509-W011
V509-W016
V509-W011D
V509-W016D
Model
Power supply (5 VDC)
Recommended model:
S8VS-01505
PC (IBM PC/AT or
compatible)
Programmable
Controller

Related parts for v500-r521c2