ledwa80x80m Banner Engineering Corp., ledwa80x80m Datasheet - Page 2

• Manufacturer Part Number: ledwa80x80m
• Description: Led..a80x80m Series Area Lights
• Manufacturer: Banner Engineering Corp.

Figure 1. Area light dimensions
LED..A80X80M Series Area Lights
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: [phone] • www.bannerengineering.com • [e-mail]
P/N 116949
SMBABM
40.6 mm
(1.60")
2x 12.7 mm
2.2 mm
(0.09")
92.6 mm
10.2 mm
(3.65")
(0.40")
(0.50")
• 13-ga. zinc-plated low-carbon steel
• (4) M4 Phillips flathead screws included
• For mounting light from front
30.5 mm
(1.20")
60.9 mm
86.4 mm
(2.40")
(3.40")
110.4 mm
(4.35")
®
4.7 mm
(0.18")
8.8 mm
(0.35")
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects
for one year. Banner Engineering Corp. will repair or replace, free of charge, any product
of its manufacture found to be defective at the time it is returned to the factory during
the warranty period. This warranty does not cover damage or liability for the improper
application of Banner products. This warranty is in lieu of any other warranty either
expressed or implied.
Accessory Mounting Brackets
2x Ø4.6 mm
(0.18")
C'sink ø8.3 mm
(0.33")
5.1 mm
(0.20")
46.2 mm
(1.81")
SMBACM
92.5 mm
(3.64")
15.8 mm
13.8 mm
(0.54")
(0.62")
61.0 mm
15.8 mm
61.0 mm
10.2 mm
(2.40")
(0.40")
(0.62")
(2.40")
8.2 mm
(0.32")
1/4-20
• 14-ga. zinc-plated low-carbon steel
• (4) M4 socket-head cap screws, washers and
• For mounting light from rear
2x M6 x 1
hex key included
55.1 mm
(2.17")
2x 22.9 mm
(0.90")
110.2 mm
94.0 mm
(4.34")
(3.70")
4x M4 x 0.7
(7.1 mm Deep)
94.0 mm
(3.70")
2x 14.9 mm
8.1 mm
(0.32")
46.2 mm
(1.82")
(0.59")