pth12050 Astec Powe, pth12050 Datasheet
pth12050
Available stocks
Related parts for pth12050
pth12050 Summary of contents
Page 1
NEW Product PTH05020 5Vin Single ...
Page 2
... The POLA is a collaboration between Artesyn Technologies, Astec Power and Texas Instruments to offer customers advanced non-isolated modules that provide the same functionality and form factor. Product series covered by the ...
Page 3
System Interface Information 2.1 Input Capacitor The recommended input capacitance is determined by 700mA rms 1 minimum ripple current rating and 1000µF Ripple current and <100mΩ equivalent series resistance (ESR) values are the major considerations, along with temperature, when ...
Page 4
Mechanical Information 3.1 Mechanical Outline Drawings 1.495 (37.97) 0.125 (3.18) 0.125 (3.18) 0.060 0.060 0.500 (1.52) 0.625 (15.88) (1.52) (12.70 0.750 0.870 (19.05) (22.10 TOP VIEW Dimensions in Inches ...
Page 5
Packaging Information 4.1 Packaging The PTH05020 are available in trays of 15 units and tape and reel format in quantities of 150 units per reel. Tray dimensions including pick point are shown in Figure 4. ø 0.0591+0.0039 -0.0000 -0.00 ...
Page 6
Operating Information 6.1 Overtemperature Protection (OTP) Only the PTHxx020 and PTHxx030 series of products have overtemperature protection. These products have an on-board temperature sensor that protects the module’s internal circuitry against excessively high temperatures. A rise in the internal ...
Page 7
Feature Set 7.1 Adjusting the Output Voltage of the PTH05020 The V adjust control (pin 4) sets the output voltage of the PTH05020 o product. The adjustment range is from 0.8V to 3.6V. The adjustment method requires the addition ...
Page 8
PTH05020W set 1000µF Q1 BSS138 1 = Inhibit GND Figure 9 - Typical Application of the Inhibit Function Figure 10 - Typical Rise in Output ...
Page 9
PTH05020 (Top View SET Q 1 MargDown Q 2 MargUp GND Figure 11 - Margin Up/Down Application Schematic 7.5 Remote Sense The ...
Page 10
Thermal Test Set-up All of the data was taken with the converter soldered to a test board which closely represents a typical application. The test board is a 1.6mm, eight layer FR4 pcb with the inner layers consisting of ...
Page 11
Auto-Track™ 10.1 Auto-Track™ Function The Auto-Track™ function is unique to the PTH family, and is available with the all “Point-of-Load Alliance” (POLA) products. Auto- Track was designed to simplify the amount of circuitry required to make the output voltage ...
Page 12
Figure 16 - Power Up & Power Down Waveforms Application Note © Artesyn Technologies® 2005 The information and specifications contained in this Application Note are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for ...