psa16u-480-poe Phihong USA Inc., psa16u-480-poe Datasheet

no-image

psa16u-480-poe

Manufacturer Part Number
psa16u-480-poe
Description
Single Port 15.4w Power Over Ethernet Adapter Psa16u Ieee 802.3af Compliant
Manufacturer
Phihong USA Inc.
Datasheet
Features
Applications
Safety Approvals
Mechanical Characteristics
Output Specifications
Ripple And Noise*
<500Hz
500Hz-150KHz
150KHz-500KHz
500KHz-1MHz
*As per IEEE802.3af Table 33-5. For Legacy detection or AC disconnect please contact the factory.
Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the factory and
visit
WWW.PHIHONG.COM
PSA16U-480(POE)
www.phihong.com
Model
Fully Compliant with IEEE802.3af
Diagnostic LEDs
Non-Vented Case
IP Telephones
Wireless Network Access Points
Blue Tooth Access Point
cUL/UL
CE
CCC
S-Jet
Length: 140mm (5.51in)
Width: 65mm (2.55in)
for the most up-to-date specifications.
Vp-p*
0.5
0.15
0.15
0.1
Single Port 15.4W Power Over Ethernet Adapter
PSA16U IEEE 802.3af compliant
DC Output
Voltage
48V
Min.
0A
Load
Max.
0.35A
IOL Test Report
Full Protection OTP, OCP, OVP
Data and Power carried over one Ethernet Cable
Security Camera
IP Print Servers
TUV
FCC
SAA
Height: 36mm (1.42in)
Weight: 0.2Kg (0.44lb.)
Line
Regulation
±4%
Load

Related parts for psa16u-480-poe

psa16u-480-poe Summary of contents

Page 1

... WWW.PHIHONG.COM Single Port 15.4W Power Over Ethernet Adapter PSA16U IEEE 802.3af compliant Features • Fully Compliant with IEEE802.3af • Diagnostic LEDs • Non-Vented Case Applications • IP Telephones • Wireless Network Access Points • Blue Tooth Access Point Safety Approvals • cUL/UL • ...

Page 2

... PSA16U-480(POE) Characteristics INPUT: AC Input Voltage Range 90 to 264VAC AC Input Voltage Rating 100 to 240VAC AC Input Current 0.5A(RMS) max. for 90VAC 0.35A(RMS) max. for 240VAC Leakage Current 0.25mA max. @ 254VAC 60Hz AC Input Frequency 47-63Hz AC Inrush Current 15A(RMS) max. for 115VAC 20A(RMS) max. for 230VAC ...

Page 3

... PSA16U 480(POE) Led Function RJ45 Data IN Power-up Sequence: Upon power-up, all 3 LEDs will light for 2 seconds, as part of the self-test for the internal microprocessor software. After the end of the 2 seconds, the "ON" LED will illuminate green, signifying that the DC output voltage is available for powering a compliant load (to the 802.3af PoE standards). ...

Related keywords