k3hb-rnb-l1at2424 Omron Corporation, k3hb-rnb-l1at2424 Datasheet - Page 15
![no-image](/images/no-image-200.jpg)
k3hb-rnb-l1at2424
Manufacturer Part Number
k3hb-rnb-l1at2424
Description
Rotary Pulse Indicator K3hb-r
Manufacturer
Omron Corporation
Datasheet
1.K3HB-RNB-L1AT2424.pdf
(18 pages)
■ Dimensions
Wiring Precautions
• For terminal blocks, use the crimp terminals suitable for M3 screws.
• Tighten the terminal screws to the recommended tightening torque
• To prevent inductive noise, separate the wiring for signal lines from
Wiring
• Use the crimp terminals suitable for M3 screws shown below.
Unit Stickers (included)
• No unit stickers are attached to the Digital Indicator.
• Select the appropriate units from the unit sticker sheets provided.
Note: For measurements for commercial purposes, be sure to use
of approx. 0.5 N·m.
that for power lines.
the unit required by any applicable laws or regulations.
5.8 mm max.
5.8 mm max.
101.2
91
96
Terminal cover (included)
100
48
12
(112)
1.3
Character Size for Main Display (mm)
Terminal: M3, Terminal Cover: Accessory
*DeviceNet models: 97 mm
PV display
2
7.6
Mounting Method
1. Insert the K3HB into the mounting cutout in the panel.
2. Insert watertight packing around the Unit to make the mounting
3. Insert the adapter into the grooves on the left and right sides of
LCD Field of Vision
The K3HB is designed to have the best visibility at the angles shown
in the following diagram.
Rubber Packing (Sold Separately)
K32-P1
watertight.
the rear case and push until it reaches the panel and is fixed in
place.
14.2
10°
30°
95 *
Watertight
SV display
packing
3.5
If the rubber packing is lost or damaged, it can
be ordered using the following model number:
K32-P1.
(Depending on the operating environment,
deterioration, contraction, or hardening of the
rubber packing may occur and so, in order to
ensure the level of waterproofing specified in
NEMA4, periodic replacement is recommended.)
Note: Rubber packing is provided with the
4.9
44.8
75 min.
Controller.
Mounting Recommended Panel Thickness
1 to 8 mm.
Mount the product horizontally.
Panel Cutout Dimensions
92
Adaptor
+0.8
0
120 min.
45
+0.6
K3HB-R
0
15