psb4595 ETC-unknow, psb4595 Datasheet - Page 48

• Manufacturer Part Number: psb4595
• Description: Analog Line Interface Solution Alis
• Manufacturer: ETC-unknow

Note: The analog trans-hybrid filter is an analog pre-filter optimized for long loops with a
Note: These values do not include the voltage drop at the external diodes. See also “DC
DCI
DCR
Note: If DCU is programmed to 7.2V (DCU = 11), then R for the DC characteristic is
6.3.5
C
Semiconductor Group
Bit
B_off = 0:
B_off = 1:
DCU = 00:
DCU = 01:
DCU = 10:
DCU = 11:
DCI = 0:
DCI = 1:
DCR = 00:
DCR = 01:
DCR = 10:
DCR = 11:
ms (read only)
trans-hybrid loss of about 10 dB.
Characteristics” on page 88.
always 70
84.
XR4 Extended Register 4 (Cadence)
C_7
7
Limit current for the DC characteristic
Resistance of the DC characteristic
irrespective of the contents of DCR. See “DC Termination” on page
C_6
U0 for DC characteristic is 0 V
U0 for DC characteristic is 1.5 V
U0 for DC characteristic is 3.5 V
U0 for DC characteristic is 7.2 V
Limit current is 100 mA
Limit current is 50 mA
R for DC characteristic is 280
R for DC characteristic is 240
R for DC characteristic is 200
R for DC characteristic is 100
Contains the measured time between the two first ring bursts (time
step 64 ms) if the time is below the cadence time-out as
programmed in XR2.
Analog trans-hybrid filter on
Analog trans-hybrid filter off
6
C_5
5
C_4
4
48
C_3
Analog Line Interface Solution
3
C_2
2
PSB 4595 / PSB 4596
Programming ALIS
C_1
1
Data Sheet 06.98
C_0
0