hmc523 Hittite Microwave Corporation, hmc523 Datasheet
![no-image](/images/no-image-200.jpg)
hmc523
Available stocks
Related parts for hmc523
hmc523 Summary of contents
Page 1
... Isolation High Input IP3: +25 dBm Die Size: 1.49 x 1.14 x 0.1 mm General Description The HMC523 is a compact I/Q MMIC mixer which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The chip utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated in a GaAs MESFET process ...
Page 2
... Input IP3 vs. LO Drive Order On-line at www.hittite.com HMC523 15 - 23.6 GHz +25C +85C -55C FREQUENCY (GHz FREQUENCY (GHz +13 dBm LO = +15 dBm ...
Page 3
... Rejection vs. LO Drive -10 -20 -30 - +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm - +19 dBm - Order On-line at www.hittite.com HMC523 GaAs MMIC I/Q MIXER 15 - 23.6 GHz 0 -5 RETURN LOSS CONVERSION GAIN 0.5 1 1 FREQUENCY (GHz +13 dBm LO = +15 dBm LO = +17 dBm ...
Page 4
... All values in dBc below IF power level ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Die Packaging Information Standard GP-2 [1] Refer to the “Packaging Information” section for die packaging dimensions. [2] For alternate packaging information contact Hittite Microwave Corporation. Order On-line at www.hittite.com HMC523 15 - 23.6 GHz nLO ...
Page 5
... For operation to DC, this pad must not source/sink more than 3mA of current or die non- function and possible die failure will result. Pads 5 and 6 are alternate IF ports. The backside of the die must be connected to RF/DC ground. Order On-line at www.hittite.com HMC523 GaAs MMIC I/Q MIXER 15 - 23.6 GHz Interface Schematic ...
Page 6
... Thick GaAs MMIC 0.076mm (0.003”) 0.102mm (0.004”) Thick GaAs MMIC 0.076mm (0.003”) 0.150mm (0.005”) Thick Moly Tab Order On-line at www.hittite.com HMC523 15 - 23.6 GHz Wire Bond 3 RF Ground Plane 0.127mm (0.005”) Thick Alumina Thin Film Substrate Figure 1. Wire Bond RF Ground Plane 0.254mm (0.010” ...