DF25G-20S-0.5SD HIROSE [Hirose Electric], DF25G-20S-0.5SD Datasheet - Page 8

Manufacturer Part Number

DF25G-20S-0.5SD

Description

0.5 mm Contact Pitch, Board-to-FPC, Board-to-Fine Coaxial Ribbon Cable

Manufacturer

HIROSE [Hirose Electric]

Datasheet

1.DF25G-20S-0.5SD.pdf (11 pages)

Note 1: The shield cover and the plug are supplied as separate components.

Note 2: Dedicated assembly fixtures are required at each stage of the termination process.For details refer to the instruction manual supplied with

Note 3: To protect the FPC, insertion and disconnection of the connector should be performed parallel to the mating direction.

Note 4: To protect the FPC, please do not apply excessive tension to it.

Note 5: When the FPC is to be bent, refer to FPC manufacturer for bending radius and other specific recommendations.

Note 6: The connector body can be used only one time.

Note 1: The shield cover and the plug are supplied as separate components.

Note 2: Dedicated assembly fixtures are required at each stage of the termination process.For details refer to the instruction manual supplied with

Note 3: To protect the FPC, insertion and disconnection of the connector should be performed parallel to the mating direction.

Note 4: To protect the FPC, please do not apply excessive tension to it.

Note 5: When the FPC is to be bent, refer to FPC manufacturer for bending radius and other specific recommendations.

Note 6: Neither the coaxial cable nor the connector body can be used re-used.

Step 1

Step 2

Step 3

Step 1

Step 2

Step 3

Plug (FPC Type) Termination Procedures Dedicated assembly tooling is required.

Plug (For Fine Pitch Ribbon Coaxial Cable) Assembly Procedures

the tools.

termination

Completed

Step 4

Step 5

Step 4

Step 5