T23-A230XF4 EPCOS [EPCOS], T23-A230XF4 Datasheet - Page 3

• Manufacturer Part Number: T23-A230XF4
• Description: SURGE ARRESTER 3-electrode arrester
• Manufacturer: EPCOS [EPCOS]

Dimensional drawing
Cautions and warnings
KB AB E / KB AB PM
Please read Cautions and warnings and
Important notes at the end of this document.
a)
1)
2)
3)
4)
5)
Terms in accordance with ITU-T Rec. K.12 and DIN 57845/VDE0845
The arrester failsafe mechanism contains a solder pellet with a melting
temperature between 193 and 203 °C.
Surge arrester
3-electrode arrester
xxxx = B102 (100 pcs. on tray)
At delivery AQL 0.65 level II, DIN ISO 2859
In ionized mode
Test according to ITU-T Rec. K.12
Tip or ring electrode to center electrode
Total current through center electrode, half value through
tip respectively ring electrode.
The short-circuit spring does not trigger until 180 °C is reached depending on the material. Care
must be taken to limit the thermal radiation onto adjacent parts to safe values.
Depending on the incorporation position, the surge arrester may have to be additionally secured
by mechanical means.
Surge arresters must not be operated directly in power supply networks.
Surge arresters may become hot in case of longer periods of current stress (danger of burning).
Surge arresters may be used only within their specified values. In case of overload, the head
contacts may fail or the component may be destroyed.
Damaged surge arresters must not be re-used.
B502 (500 pcs. on tray)
Page 3 of 4
Not to scale
Dimensions in mm
Non controlled document
B88069X8750B502
Issue 09 / 2007-10-18
T23-A230XF4