ps710e-1a California Eastern Laboratories, ps710e-1a Datasheet - Page 10

• Manufacturer Part Number: ps710e-1a
• Description: Optocouplers & Ssrs 6, 8-pin Dip, 350 Ma Continuous Load Current 1-ch, 2-ch Optical Coupled Mos Fet
• Manufacturer: California Eastern Laboratories

RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
(2) Wave soldering
(3) Cautions
10
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10269EJ01V1DS
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
PS7113-1A,-2A,PS7113L-1A,-2A
(heating)
to 60 s
to 10 s
260˚C MAX.
220˚C