mx25l512c Macronix International Co., mx25l512c Datasheet - Page 2

• Manufacturer Part Number: mx25l512c
• Description: 512k-bit [x 1] Cmos Serial Flash
• Manufacturer: Macronix International Co.

• SI Input
• SO Output
• WP# pin
• HOLD# pin
• PACKAGE
P/N: PM1469
GENERAL DESCRIPTION
MX25L512C is a CMOS 524,288 bit serial Flash memory, which is configured as 65,536 x 8 internally. MX25L512C
features a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus. The three bus
signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device
is enabled by CS# input.
MX25L512C provide sequential read operation on whole chip.
After program/erase command is issued, auto program/ erase algorithms which program/ erase and verify the spec-
ified page or sector/block locations will be executed. Program command is executed on page (256 bytes) basis, and
erase command is executes on chip or sector (4K-bytes).
To provide user with ease of interface, a status register is included to indicate the status of the chip. The status read
command can be issued to detect completion status of a program or erase operation via WIP bit.
When the device is not in operation and CS# is high, it is put in standby mode and draws less than 10uA DC cur-
rent.
The MX25L512C utilizes Macronix's proprietary memory cell, which reliably stores memory contents even after
100,000 program and erase cycles.
- Hardware write protection
- pause the chip without diselecting the chip
- 8-pin SOP (150mil)
- 8-USON (2x3mm)
- 8-pin TSSOP (173mil)
- All Pb-free devices are RoHS Compliant
- Serial Data Input
- Serial Data Output
2
MX25L512C
REV. 1.0, APR. 14, 2009